Alex- Animated Head (#WD5756): Build this working head from the supplied kit of pre-cut pieces. Includes full feature animate controller providing record and playback facilities for both motion, flashing blue eyes and sound. Head turns and nods, eyes swivel and lips move. Use for displays, messages, reception desks. Spooky! Approx 275mm high. Requires 9VDC @1.0A supply. $150.00

StampBug- Walking Insect (#WD5952): Hugely entertaining kit makes an ideal starter to robotics. Walks forward until feelers detect obstacle then turns either left or right before continuing. Stamp1 based so good platform for future experimentation (code supplied on diskette). Full kit including servos. Approx 250 x 250mm when assembled. $140.00

StampBug Upgrade Kit (#WD5955): Upgrade your version 4.1, 4.2 or 4.3 StampBug to a Stamp2 specification. Upgrade provides full speed control, additional I/O lines, program space and Windows programming environment. Breadboard area for additional components. Add our serial IR decoder for control via your TV remote. Ships with code examples on diskette, hardware, m-servo driver chip and discrete component version of the Stamp2. $75.00

BigFoot- Walking Biped Kit (#WD5400): A real walking Biped but it uses only 2 servos to walk forwards, backwards and turn. "Toe" switches for obstacle avoiding and led "eyes". Stamp1 based code supplied on diskette and pre-loaded into built circuit board. Includes pre-cut 3mm body parts, servos, hardware and circuit board- requires 4xAA Nicads. Approximately 300mm high. $125.00

Robbie- Walking Humanoid (#WD5710): Body parts pre-cut from 3mm ply for accurate assembly. Includes book, servos, servo controller, Windows software, hardware and body panels. Will walk on the desk-top under computer control when assembled. Approx 400mm high. $325.00

TecArms are made from precision cut 3mm ply for accurate and easy assembly. Powerful 10kgcm servos are used for the waist, shoulder and elbow joints with 3 and 6kgcm servos for the gripper and wrist actions.

Approximate dimensions are as follows:

Assembled height - 200mm
Working reach - 300mm
Lift Capability - 250gms
Grip opening - 90mm

Servo control is by a version of our serial servo driver with integral soft-start facility to avoid start-up jolts. Control either from the supplied Windows software or from the optional Keypad (#WD5505). Requires 9vDC @2A power supply.

TecArm 6 (#WD5507): Illustrated with customer stained body parts has waist, shoulder, elbow, wrist up/down, wrist rotate and gripper actions. $330.00

TecArm 5 (#WD5506): Identical to TecArm6 except no wrist rotate action. $275.00

TecFoot (#WD5740): This big brother version of BigFoot stands approx 600mm high. It uses the BS2-IC, twin m-servo driver chips and 5 servos. Two servos per leg control the ankle and stride and the 5th servo controls the leg splay for turning, allowing more control for advanced biped walking. Kit include all body panels, hardware, 5 servos, pre-built control board and Stamp2 software examples. (Requires BS2-IC, 9v PP3 battery and 4xAA Nicads -- not included.) $295.0

Servo Keypad (#WD5505): 6-button keypad for use with our serial servo driver boards. Simple to use alternative to PC connection and control. Allows all servos to move simultaneously. Slow and fast speed select option. Requires PP3 type battery. $57.00

Wizard Card (#WD1960): The WIZARD CARD will record and playback up to 5 minutes of action for up to 4 R/C type servos and 4 digital outputs. The card also incorporates features such as looping action with variable delay between loops, auto start-up on power up and connection interface for a PIR. Connection for remote switch or pressure pad to initiate playback. Recording sessions are built up on a track-by-track basis - no programming is required. During recording, all previously recorded tracks are re-played to aid synchronization. Everything your animatronic needs, but the AUTOTALK to make it speak! $175.00

FEATURES:

• 4 Servo output channels, each capable of recordin and playback of up to 5 minutes of action.
• 4 Digital channels - 0/5V @ 10ma outputs
• Potentiometer to adjust the servo positions during recording or to determine the time delay between play loops during automatic loop play - adjustable between 0 and 65 seconds.
• NEXT, PLAY and RECORD buttons
• Record enable/disable jumper
• AUTO-PLAY and LOOP-PLAY switches

Auto Talk Card (#WD1961): The AUTOTALK module will move the R/C type servo in response to either an audio or speech input signal from a CD Player, tape recorder, or speaker jack. AUTOTALK includes the facility to set both the servo end travel points and the directon of operation. Make your animatronic talk and sing! $80.00

ROMCOPY (#WD1962): The ROMCOPY provides a quick and convenient means of duplication the serial EEPROM used in the PUPPETEER, ANIMATE+, and the WIZARD control cards. ROMCOPY supports 2 types of serial EEPROMS - the Microchip 25LC640 and the Microchip 24LC256. ROMCOPY only allows duplication between similar types of EEPROMS. Connect a standard 9 volt battery to the provided connector. $125.00